Equipment and farm technology
Webinars on Irrigation System Troubleshooting
Find the fault before the crop pays for it
GARDEN CITY, Kansas — When an irrigation system fails in July, the cost shows up fast. Troubleshooting is the skill of finding the cause quickly and fixing it. Webinars from extension, dealers and irrigation specialists teach a logical approach.
Why Problems Matter Early
Irrigation problems can cause uneven application, wasted water and energy and stress during critical crop stages. A clogged nozzle, a pressure problem or an electrical fault can go unnoticed for days. Regular checks and a plan for quick response limit losses.
Where to Learn
Universities in irrigated regions host winter irrigation schools. The University of Nebraska CropWatch offers irrigation guidance. The NRCS provides technical help on irrigation systems and efficiency. Irrigation dealers hold training sessions, and manufacturers publish manuals and troubleshooting guides.
A Logical Approach
Webinars usually teach a sequence:
- Describe the symptom exactly.
- Check the basics: power, water supply, valves, fuel and pressure.
- Narrow down to a component or section.
- Test with gauges or meters.
- Fix and confirm the result.
- Record the cause and repair.
Avoid replacing parts at random.
Common Issues
- Low pressure: plugged filters, worn pumps, leaks or wrong nozzles
- Uneven application: worn or mismatched nozzles, tower speed problems or sprinkler plugging
- Pivot stops or misalignment: electrical faults, drive problems or tire issues
- Pump problems: air in the line, worn impellers or power issues
- Clogged emitters in drip systems: debris, algae or mineral buildup
Ask presenters for tests that help isolate each.
Do Preventive Work
Inspect systems before the season. Check nozzles, gearboxes, tires, drive units, wiring and controls. Flush lines, clean filters and replace worn parts. Keep spares of common parts. A system evaluation can reveal uneven coverage. Check with your conservation district or extension about evaluations.
Safety Around Water and Power
Electricity and water are a dangerous mix. Lock out power before working on equipment. Use qualified electricians for electrical repairs. Be careful of moving pivot towers and hot engines. OSHA provides safety information.
Keep Records
Note flow rates, pressure, hours and repairs. Records help you spot gradual decline. They also show whether repairs held.
Know the Rules
Water use is regulated. Check state and local rules for permits, metering and reporting. Drought.gov provides information on current conditions.