Ag Podcast & Webinar Hub

Learning farm skills

Learning Irrigation Scheduling from Expert Webinars

When to water and how much

LUBBOCK, Texas — Irrigation scheduling sounds simple: water when the crop needs it. In practice it means answering two questions every few days during the season, when to start and how much to apply, with imperfect information and an energy bill running in the background. Expert webinars help because they put the graphs, sensor readouts and calculations on screen.

The Concepts Behind the Schedule

A good scheduling webinar will start with a few building blocks:

  • Soil water holding capacity. How much water your soil can store in the root zone, which depends on texture and depth
  • Management allowed depletion. The share of that stored water you let the crop use before irrigating, often set near half for many crops but varying by crop, soil and stage
  • Evapotranspiration. The water lost from the soil and plant surfaces, driven by weather and crop size
  • Crop coefficients. Factors that adjust reference evapotranspiration to a particular crop and growth stage
  • Effective rainfall. The portion of rain that actually ends up in the root zone

If these terms are new, treat the first webinar as vocabulary training. The second one will make more sense.

Methods You Will Hear About

Webinars usually cover several ways to decide when to irrigate. The checkbook method tracks daily crop water use and rainfall like a bank balance. Soil moisture sensors, such as tensiometers, capacitance probes and granular matrix sensors, report water status at set depths. ET-based tools and mobile apps estimate crop water use from weather data. Some farmers rely on feel and appearance, which works better when combined with something measurable. The University of Nebraska-Lincoln CropWatch site publishes extensive irrigation management material for growers.

Examples From Extension Programs

University of Arkansas Division of Agriculture specialists have offered a webinar series on managing row crop operating costs that includes using soil moisture sensors for irrigation management, alongside topics like seeding rates and farm financial decisions. A cropping systems specialist from Oklahoma State University has discussed on a farm podcast how variable-rate practices and soil moisture sensing can help apply water more precisely from center pivots. Check your own state's extension site for a version tied to your soils and crops. Your climate, soil type and water source set the rules.

Match the Schedule to Crop Stage

Crops do not need water evenly across the season. Corn is especially sensitive around tassel and silk, soybeans around pod set and fill, and cotton around bloom. Webinars that walk through crop stage by stage show you where a missed irrigation hurts most and where you can stretch an interval. Late-season decisions, such as when to cut off water, can also save money, and a good presenter will explain how to judge that for your crop.

Common Mistakes to Listen For

Presenters often point out the same pitfalls:

  • Installing sensors in unrepresentative spots, such as a low area or a sandy knoll
  • Trusting sensor numbers without checking them against a probe or a shovel
  • Ignoring system capacity, since a pivot that can only apply a certain amount per day cannot catch up in a heat wave if you start late
  • Starting too late in the season and trying to play catch-up
  • Forgetting that pumping costs rise with depth to water and energy prices

Write down the mistakes that sound familiar and fix one before the next season.

Do Not Forget Rules and Conditions

Water use is governed by state and local rules that vary widely, including permits, allocations and reporting requirements. Check with your local water authority or conservation district before changing an irrigation plan. For conditions, Drought.gov provides current drought information from federal agencies, and the USDA NRCS can provide technical assistance on irrigation efficiency and conservation practices.

Practice With a Simple Water Budget

Start With a Pump and System Check

Scheduling only works if the equipment delivers what you think it does. Before the season starts, check pumps, nozzles, pressure and flow rates, and look for leaks and clogged emitters or sprinklers. A pivot that applies uneven water wastes both water and energy, and no schedule can fix that. Many webinars encourage growers to run a uniformity test or ask for an irrigation system evaluation from a local conservation office or extension educator. Once you know your actual application rate, you can write a schedule that fits the system. Keep a copy of the pump curve and your energy bills together so you can see what each inch of water costs.

After a webinar, set up a simple checkbook for one field. Record weekly rainfall, irrigation applied and estimated crop use. Compare it to a sensor reading if you have one. By the end of the season you will have a record of how well your estimates matched reality, and next year's schedule will be better for it.